Product ID:0202 LIQUID HARDENER 10710
MSDS Date:02/14/1996
FSC:8040
NIIN:00F056371
Kit Part:Y
MSDS Number: CHPLQ

ITW DEVCON CORPORATION

30 ENDICOTT ST
DANVERS, MA 01923-5000
US

Emergency Phone: 978-777-1100

Info Phone: 978-777-1100

Cage: 16509

ITW DEVCON CORPORATIO

DANVERS, MA 01923 US

Telephone: 508-777-1100

Cage: 16509

TRIETHYLENETETRAMINE, EPOXY HARDNER

CAS: 112-24-3

RTECS: YE6650000

Fraction By Weight: 30-60%

DIMER FATTY ACIDS, TALL OIL FATTY ACIDS,

CAS: 68082-29-1

Fraction By Weight: 50-65%

NONYL PHENOL *98-2*

CAS: 25154-52-3

RTECS: SM5600000

Fraction By Weight: 5-20%

N-AMINOETHYLPIPERAZINE, 1-PIPERAZINEETHANAMINE,

CAS: 140-31-8

RTECS: TK8050000

Fraction By Weight: 1-15%

LD50 LC50 Mixture:ORAL LD50(RAT): 2000 MG/KG (SEE SUPP)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEVERE EYE, SKIN & RESPIRATORY
IRRITANT. HARMFUL IF ABSORBED THROUGH SKIN. MAY CAUSE
SENSITIZATION. INHALATION: NOSE & THROAT IRRITANT. INGESTION: MAY
CAUSE IRRITATION OF MOUTH, THROAT & GASTROINTESTI NAL TRACT.
REPEATED/PROLONGED EXPOSURESMAY RESULT IN SKIN EFFECTS, CORROSION,
CONJUNCTIVITS/CORNEAL DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, NAUSEA, VOMITING, ITCHING, RASHES,
SWELLING OF THE SKIN, SORE THROAT, FAINTNESS, HEADACHE, DEFATTING
OF SKIN.
Medical Cond Aggravated by Exposure:EYE DISEASE, SKIN DISORDERS &
ALLERGIES.

First Aid:EYES: IMMEDIATELY FLUSH W/CLEAN WATER FOR 15 MINS. SKIN: WASH
WELL W/SOAP & WARM WATER. INHALATION: REMOVE TO FRESH AIR. GIVE
OXYGEN/CPR IF NEEDED. INGESTION: DON'T INDUCE VOMITING. DILUTE
W/LOTS OF M ILK/WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:TCC
Flash Point:>200F
Extinguishing Media:WATER, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR SCBA & SUFFICIENT PROTECTIVE GEAR TO
PREVENT SKIN & EYE CONTACT W/THIS MATERIAL.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:AVOID CONTACT. ELIMINATE IGNITION SOURCES.
VENTILATE AREA. DIKE/CONTAIN & ABSORB W/CLAY/SAND/OTHER ABSORBENT.
LARGE: PUMP TO STORAGE/SALVAGE VESSELS. SOAK UP RESIDUE W/AN
ABSORBENT, DISPOSE OF PROPERL Y. FLUSH AREA W/WATER TO REMOVE
RESIDUE. (SEE SUPP

Handling and Storage Precautions:STORE IN A COOL, DRY AREA AWAY FROM
HIGH TEMPERATURES & FLAMES. HANDLE MIXED RESIN & HARDENER IAW/THE
POTENTIAL HAZARD OF THE CURING AGENT USED.
Other Precautions:PROVIDE APPROPRIATE VENTILATION/RESPIRATORY
PROTECTION AGAINST DECOMPOSITION PRODUCTS DURING WELDING/FLAME
CUTTING OPERATIONS & TO PROTECT AGAINST NUISANCE DUST DURING
SANDING/GRINDING OF CURED PRODUC T. AVOID CONTACT W/SKIN,
EYES/CLOTHING.

Respiratory Protection:NONE NEEDED IN NORMAL USE W/PROPER VENTILATION.
IN POORLY VENTILATED AREAS/WHEN CREATING A DUST/MIST, USE NIOSH
APPROVED ORGANIC VAPOR RESPIRATOR.
Ventilation:MECHANICAL (GENERAL) FOR OCCASSIONAL USE. LOCAL EXHAUST FOR
PROLONGED/REPEATED USE IS RECOMMENDED
Protective Gloves:CHEMICAL RESISTANT RUBBER/NEOPRENE
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS.
Other Protective Equipment:PROTECTIVE GEAR, BUTYL RUBBER/NITRILE
GLOVES, CHEMICAL GOGGLES
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. DESTROY DECONTAMINATED LEATHER ARTICLES SUCH AS SHOES,
BELTS.
Supplemental Safety and Health
LD50 INFO IS FOR TRIETHYLENETETRAMINE. AVOID BREATHING VAPORS. USE
W/ADEQUATE VENTILATION. DON'T TAKE INTERNALLY. DON'T EXPOSE TO
HEAT/FLAMES. SPILL CONT'D: PREVENT FROM ENTERING DRAINAGE/SEWER
SYSTEM S/WATERWAYS/SURFACE WATERS. WASH THOROUGHLY W/SOAP & WATER
AFTER USING/BEFORE EATING/DRINKING/SMOKING/USING BATHROOM.

Boiling Pt:B.P. Text:>450F
Vapor Pres:<0.01
Vapor Density:>1
Spec Gravity:0.98
pH:10-11
Evaporation Rate & Reference:(BUTYL ACETATE=1): <1
Solubility in Water:30-60%
Appearance and Odor:WHITE PASTE W/MILD AMMONIA-LIKE ODOR
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, CHLORINATED ORGANIC COMPOUNDS.
Stability Condition to Avoid:EXTREME HEAT, OPEN FLAME
Hazardous Decomposition Products:ACRID & TOXIC FUMES W/ORGANIC AMINES,
AMMONIA, OXIDES OF CARBON & NITROGEN.
Conditions to Avoid Polymerization:HEAT IS RELEASED WHEN THIS PRODUCT
IS MIXED W/EPOXY RESINS; USE CARE WHEN MIXING LARGE QUANTITIES.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.